Call us on 918277173677

Advantages & Features of Automatic water level controller

Easy installation
Low maintenance
Compact and elegant design
Fully automatic
Saves water, motor and energy
Increases pump life.
Avoids seepage of water from roofs & walls due to overflowing tanks.
Ideal for difficult to access overhead tanks.
Feather touch keys
 SRI DIGITEK ™  Automatic water level controller will automatically START the pump as soon as the water level falls below the predetermined level (usually 1/2 tank) and shall SWITCH OFF the pump as soon as tank is full or water level in the lower tank is at below minimum level.
 SRI DIGITEK ™ Automatic water level controller allows you to decide the water storage levels for operations of the pump in the overhead tank and the sump.
Built in Indications of 4Levels in the Upper Tank and 3 Levels in the Lower Tank
Flow indication (running light), voltage level indication,
AUTO / MANUAL operation soft switch for special operations like watering the plants or car washing from pump.
The Automatic water level controller completely stops overflow of water from the over head tank or dry running of pump there by saves electricity and water.
Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic moulded conductive electrodes are Long life sensors, do not require frequent cleaning or replacement.
Consume very little energy, ideal for continuous operation.

 

 

Home | About Us | Contact Us
Powered by :